Reflectance confocal microscopy - Consensus terminology glossary in Brazilian Portuguese for normal skin, melanocytic and non-melanocytic lesions

Abstract Background: Currently, there is no uniform and official terminology in Portuguese for reflectance confocal microscopy analysis, despite the increasing number of Brazilian dermatologists using this new tool. Objective: To present the terminology in Brazilian Portuguese for the description of reflectance confocal microscopy and establish the first Brazilian consensus on terms related to normal skin and cutaneous tumors. Methods: 10 Brazilian specialists from different institutions and states of Brazil were selected to evaluate the best corresponding terms in Portuguese for normal skin, melanocytic and non-melanocytic tumors. The terms used were translated from international consensuses in the English language. The modified Delphi method was used to create the consensus in 3 steps. Results: The terms considered the most appropriate in the Portuguese language to describe the findings of normal skin, melanocytic and non-melanocytic lesions in the reflectance confocal microscopy analysis were presented. Study limitations: The limitations of the present study include the number of participants and limited regional representation (only two of the five Brazilian regions were represented). Conclusion: This Brazilian consensus represents an opportunity for dermatologists and physicians specializing in cutaneous oncology to become familiar with reflectance confocal microscopy, propagating the technique in clinical and research environments to stimulate national and international publications on this subject.

Caracterização dos estágios iniciais do câncer colorretal utilizando microscopia de autofluorescência 3D: um estudo preliminar / Early stages of colorectal cancer characterization by autofluorescence 3d microscopy: a preliminary study

ABSTRACT Background: Colorectal cancer is one of the most prevalent pathologies worldwide whose prognosis is linked to early detection. Colonoscopy is the gold standard for screening, and diagnosis is usually made histologically from biopsies. Aiming to reduce the inspection and diagnostic time as well as the biopsies and resources involved, other techniques are being promoted to conduct accurate in vivo colonoscopy assessments. Optical biopsy aims to detect normal and neoplastic tissues analysing the autofluorescence spectrum based on the changes in the distribution and concentration of autofluorescent molecules caused by colorectal cancer. Therefore, the autofluorescence contribution analysed by image processing techniques could be an approach to a faster characterization of the target tissue. Objective: Quantify intensity parameters through digital processing of two data sets of three-dimensional widefield autofluorescence microscopy images, acquired by fresh colon tissue samples from a colorectal cancer murine model. Additionally, analyse the autofluorescence data to provide a characterization over a volume of approximately 50 µm of the colon mucosa for each image, at second (2nd), fourth (4th) and eighth (8th) weeks after colorectal cancer induction. Methods: Development of a colorectal cancer murine model using azoxymethane/dextran sodium sulphate induction, and data sets acquisition of Z-stack images by widefield autofluorescence microscopy, from control and colorectal cancer induced animals. Pre-processing steps of intensity value adjustments followed by quantification and characterization procedures using image processing workflow automation by Fiji's macros, and statistical data analysis. Results: The effectiveness of the colorectal cancer induction model was corroborated by a histological assessment to correlate and validate the link between histological and autofluorescence changes. The image digital processing methodology proposed was then performed on the three-dimensional images from control mice and from the 2nd, 4th, and 8th weeks after colorectal cancer chemical induction, for each data set. Statistical analyses found significant differences in the mean, standard deviation, and minimum parameters between control samples and those of the 2nd week after induction with respect to the 4th week of the first experimental study. This suggests that the characteristics of colorectal cancer can be detected after the 2nd week post-induction. Conclusion: The use of autofluorescence still exhibits levels of variability that prevent greater systematization of the data obtained during the progression of colorectal cancer. However, these preliminary outcomes could be considered an approach to the three-dimensional characterization of the autofluorescence of colorectal tissue, describing the autofluorescence features of samples coming from dysplasia to colorectal cancer.

RESUMO Contexto: O câncer colorretal é uma das patologias mais prevalentes em todo o mundo, cujo prognóstico está ligado à detecção precoce. A colonoscopia é o padrão ouro para triagem, e o diagnóstico geralmente é feito histologicamente a partir de biópsias. Visando reduzir o tempo de inspeção e diagnóstico, bem como as biópsias e recursos envolvidos, outras técnicas estão sendo promovidas para realizar avaliações precisas de colonoscopia in vivo. A biópsia óptica visa detectar tecidos normais e neoplásicos analisando o espectro de autofluorescência com base nas mudanças na distribuição e concentração de moléculas autofluorescentes causadas pelo câncer colorretal. Portanto, a contribuição da autofluorescência analisada por técnicas de processamento de imagem poderia ser uma abordagem para uma caracterização mais rápida do tecido-alvo. Objetivo: Quantificar parâmetros de intensidade por meio do processamento digital de dois conjuntos de dados de imagens de microscopia de autofluorescência em campo amplo tridimensionais, adquiridas por amostras de tecido fresco de cólon de um modelo murino de câncer colorretal. Adicionalmente, analisar os dados de autofluorescência para fornecer uma caracterização em um volume de aproximadamente 50 µm da mucosa do cólon para cada imagem, na segunda (2ª), quarta (4ª) e oitava (8ª) semanas após a indução do câncer colorretal. Método: Desenvolvimento de um modelo murino de câncer colorretal usando indução de azoximetano/sulfato de sódio dextrano, e aquisição de conjuntos de dados de imagens Z-stack por microscopia de autofluorescência em campo amplo, de animais controle e induzidos ao câncer colorretal. Etapas de pré-processamento de ajustes de valores de intensidade seguidas por procedimentos de quantificação e caracterização usando automação de fluxo de trabalho de processamento de imagem por macros do Fiji, e análise estatística de dados. Resultados: A eficácia do modelo de indução de câncer colorretal foi corroborada por uma avaliação histológica para correlacionar e validar a ligação entre as mudanças histológicas e de autofluorescência. A metodologia de processamento digital de imagem proposta foi então realizada nas imagens tridimensionais de camundongos controle e das 2ª, 4ª e 8ª semanas após a indução química do câncer colorretal, para cada conjunto de dados. Análises estatísticas encontraram diferenças significativas nos parâmetros médios, desvio padrão e mínimos entre amostras de controle e aquelas da 2ª semana após a indução em relação à 4ª semana do primeiro estudo experimental. Isso sugere que as características do câncer colorretal podem ser detectadas após a 2ª semana pós-indução. Conclusão: O uso de autofluorescência ainda apresenta níveis de variabilidade que impedem uma maior sistematização dos dados obtidos durante a progressão do câncer colorretal. No entanto, esses resultados preliminares podem ser considerados uma abordagem para a caracterização tridimensional da autofluorescência do tecido colorretal, descrevendo as características de autofluorescência de amostras que vão da displasia ao câncer colorretal.

Effect of N-acetyl cysteine, rifampicin, and ozone on biofilm formation in pan-resistant Klebsiella pneumoniae: an experimental study

ABSTRACT BACKGROUND: To the best of our knowledge, this is the first study to evaluate the effectiveness of specific concentrations of antibiofilm agents, such as N-acetyl cysteine (NAC), rifampicin, and ozone, for the treatment of pan-resistant Klebsiella pneumoniae (PRKp). OBJECTIVES: We evaluated the effectiveness of antibiofilm agents, such as NAC, rifampicin, and ozone, on biofilm formation in PRKp at 2, 6, 24, and 72 h. DESIGN AND SETTING: This single-center experimental study was conducted on June 15, 2017, and July 15, 2018, at Istanbul Faculty of Medicine, Istanbul University, Turkey. METHODS: Biofilm formation and the efficacy of these agents on the biofilm layer were demonstrated using colony counting and laser-screened confocal microscopy. RESULTS: NAC at a final concentration of 2 μg/mL was administered to bacteria that formed biofilms (24 h), and no significant decrease was detected in the bacterial counts of all isolates (all P > 0.05). Rifampicin with a final concentration of 0.1 μg/mL was administered to bacteria that formed biofilm (24 h), and no significant decrease was detected in bacterial count (all P > 0.05). Notably, ozonated water of even 4.78 mg/L concentration for 72 h decreased the bacterial count by ≥ 2 log10. CONCLUSION: Different approaches are needed for treating PRKp isolates. We demonstrate that PRKp isolates can be successfully treated with higher concentrations of ozone.

Corneal ectasia following photorefractive keratectomy: a confocal microscopic case report and literature review / Ectasia corneana após ceratectomia fotorrefrativa: relato de caso de microscopia confocal e revisão da literatura

ABSTRACT The occurrence of corneal ectasia after photorefractive keratectomy is a rare but serious complication of refractive surgery. Possible risk factors are not well assessed, but a probable reason is the failure to detect keratoconus preoperatively. In this report, we describe a case of corneal ectasia after photorefractive keratectomy in a patient who presented a suspicious tomography pattern preoperatively but had no degenerative alterations associated with pathologic keratoconus, as revealed by in vivo corneal confocal microscopy. We also review eligible case reports of post-photorefractive keratectomy ectasia to find similar characteristics.

RESUMO A ocorrência de ectasia corneana após ceratectomia fotorrefrativa é uma complicação rara, porém grave, em cirurgia refrativa. Os possíveis fatores de risco não são bem avaliados, mas a opinião atual é que a falha na detecção de ceratocone pré-operatório possa ser o principal motivo. Neste relato, descrevemos um caso de ectasia corneana após ceratectomia fotorrefrativa em paciente apresentando padrão tomográfico suspeito no pré-operatório, mas sem alterações degenerativas associadas a ceratocone patológico, conforme revelado por microscopia confocal in vivo da córnea. Além disso, revisamos, na literatura, relatos de casos elegíveis de ectasia pós-ceratectomia fotorrefrativa para encontrar características semelhantes.

A novel agent for myeloma causing toxic keratopathy, belantamab mafodotin: a case report and literature review / Belantamabe-mafodotina, um novo agente para mieloma, causando ceratopatia tóxica: relato de caso e revisão da literatura

ABSTRACT A 60-year-old-male with refractory relapsed multiple myeloma presented with redness, pain, foreign body sensation, and blurred vision in both eyes that gradually increased after his third belantamab mafotodin infusion. Biomicroscopy revealed bilateral microcyst-like epithelial changes and epithelial crystal-like deposits, whereas in vivo confocal microscopy revealed intraepithelial and subepithelial hyperreflective deposits in corneal epithelium. Belantamab mafodotin therapy was discontinued for seven weeks due to corneal toxicity, which cleared progressively. We aim to demonstrate belantamab mafodotin-related corneal toxicity that may be detected using slit lamp and in vivo confocal biomicroscopy.

RESUMO Um homem de 60 anos, diagnosticado com mieloma múltiplo recidivante refratário, apresentou vermelhidão, dor, sensação de corpo estranho e visão turva em ambos os olhos, aumentando gradualmente após sua terceira infusão de belantamabe mafodotina. À biomicroscopia, foram observadas alterações epiteliais bilaterais semelhantes a microcistos e depósitos epiteliais semelhantes a cristais. A microscopia confocal in vivo revelou depósitos hiper-refletivos intraepiteliais e subepiteliais na córnea. Devido à toxicidade corneana, a terapia com belantamabe mafodotina foi interrompida por sete semanas e a toxicidade foi gradualmente resolvida. Nosso objetivo é demonstrar os achados à biomicroscopia confocal in vivo e à lâmpada de fenda da toxicidade corneana relacionada ao belantamabe mafodotina.

Effect of upper eyelid blepharoplasty on the ocular surface, tear film, and corneal microstructure

ABSTRACT Purpose: This study aimed to investigate the effect of upper eyelid blepharoplasty with the removal of the skin and a strip of orbicularis oculi muscle on the ocular surface, tear film, and dry eye-related symptoms. Methods: Twenty-two eyes of 22 consecutive patients operated by a single surgeon (21 females; mean age, 61 years; age range, 41-75 years) were included. All subjects completed the Ocular Surface Disease Index questionnaire, underwent in vivo confocal microscopy, tear film breakup time measurements, the Schirmer test with anesthesia, and fluorescein and lissamine green staining measurements before, 1 month, and 6 months after upper blepharoplasty alone with preseptal orbicularis excision. Results: A significant increase in Ocular Surface Disease Index, and corneal fluorescein and lissamine green staining and a significant decrease in tear film breakup time were observed after 1 month (p=0.003, p=0.004, p=0.029, and p=0.024 respectively) and 6 months (p=0.001 for all findings). No significant difference in the Schirmer test score was observed during the follow-up. None of the in vivo confocal microscopy parameters showed significant changes during the study. Conclusions: An increase in dry eye symptoms and a decrease in tear film stability along with ocular surface staining were observed in patients undergoing upper eyelid blepharoplasty.

Does the combination of whitening toothpaste and hydrogen peroxide bleaching increase the surface roughness and change the morphology of a nanofilled composite?

Aim: To evaluate changes in the surface roughness and morphology of a nanofilled composite following toothbrushing with a whitening (WT) or regular toothpaste (RT), alone or combined with 35% hydrogen peroxide bleaching (HP). Methods: Seventy disc-shaped nanofilled composite (Filtek Z350XT) specimens were randomly divided into groups (n=10): WT, RT, TB (without toothpaste ­ control) or the combinations WT/ HP, RT/HP, TB/HP and HP. All groups underwent toothbrushing simulation (60,000 cycles) and bleaching treatment (4 sessions). Mean surface roughness (Ra, µm) was measured before (T0) and after treatments (TB). Surface morphology was assessed by scanning electron microscopy (SEM) at TB. Mean Ra was analyzed using general mixed models and multiple comparisons by the Tukey-Kramer test (α=5%). Results: HP caused no surface roughness changes on the nanofilled composite after treatment (p>0.05). RT toothbrushing, combined or not with HP, increased the surface roughness (p<0.05). WT and WT/ HP protocols had no effect on the surface roughness of the composite (p>0.05). The nanofilled composite submitted to RT toothbrushing combined with HP (RT/HP) presented substantial surface alterations under SEM, showing deep depressions and round-shaped defects. Toothbrushing with RT combined with the bleaching agent increased exposure of the inorganic fillers. Conclusion: WT toothbrushing, regardless of HP combination, or the single HP protocol had no effect on the surface roughness of the nanofilled composite. However, RT combined with HP negatively affected surface roughness and presented the most noticeable surface changes among groups

A microscopia eletrônica de varredura pode ser usada para medir quantitativamente a rugosidade da dentina? / Can Scanning Electron Microscopy be used to quantitatively measure dentine roughness?

Objective: The aim of this study was to determine if SEM used with imaging software could be used to quantitatively determine the extent of dentine roughness due to tooth-brushing. Material and methods: Flat, polished dentine surfaces were subjected to 25,000 cycles of simulated tooth-brushing at 2 strokes per second with a load of 200 g. At the end of the brushing cycle, dentine surfaces were first assessed using profilometry and then subjected to SEM analysis. Ra (average roughness) readings were obtained for profilometric assessment. Using imaging software, the horizontal distance between adjacent characteristic grooves noted on micrographs was measured, ensuring that the middle of each crest of the associated groove was used as the reference point, the Crest-to-Crest distance (C-C distance). These two parameters were examined statistically for correlation. Results: When Spearman Rank tests were utilized the correlation between average Ra and crest to crest measurements was 0.709 (p <0.01). The Bland Altman plot, however, showed poor agreement between the two test parameters. Conclusion: Further work is needed to validate the use of this methodology in the quantitative assessment of tooth surface loss due to abrasion (AU)

Objetivo: O objetivo deste estudo foi determinar se o MEV usado com software de imagem poderia ser usado para determinar quantitativamente a extensão da rugosidade da dentina devido à escovação dentária. Material e Métodos: Superfícies dentinárias planas e polidas foram submetidas a 25.000 ciclos de escovação dentária simulada a 2 movimentos por segundo com uma carga de 200g. No final do ciclo de escovação, as superfícies dentinárias foram primeiro avaliadas por perfilometria e depois submetidas à análise MEV. Leituras de Ra (rugosidade média) foram obtidas para avaliação perfilométrica. Utilizando um software de imagem, foi medida a distância horizontal entre sulcos característicos adjacentes observados nas micrografias, garantindo que o meio de cada crista do sulco associado fosse usado como ponto de referência, a distância crista a crista (distância CC). Esses dois parâmetros foram examinados estatisticamente para correlação. Resultados: Quando foram utilizados os testes de Spearman Rank, a correlação entre a média de Ra e as medidas de crista a crista foi de 0,709 (p<0,01). O gráfico de Bland Altman, no entanto, mostrou fraca concordância entre os dois parâmetros de teste. Conclusão: Mais trabalhos são necessários para validar o uso desta metodologia na avaliação quantitativa da perda da superfície dentária devido à abrasão(AU)

Comparative analysis of SARS-CoV-2 variants Alpha (B.1.1.7), Gamma (P.1), Zeta (P.2) and Delta (B.1.617.2) in Vero-E6 cells: ultrastructural characterization of cytopathology and replication kinetics

Abstract This study compares the effects of virus-cell interactions among SARS-CoV-2 variants of concern (VOCs) isolated in Brazil in 2021, hypothesizing a correlation between cellular alterations and mortality and between viral load and transmissibility. For this purpose, reference isolates of Alpha, Gamma, Zeta, and Delta variants were inoculated into monolayers of Vero-E6 cells. Viral RNA was quantified in cell supernatants by RT‒PCR, and infected cells were analyzed by Transmission Electron Microscopy (TEM) for qualitative and quantitative evaluation of cellular changes 24, 48, and 72 hours postinfection (hpi). Ultrastructural analyses showed that all variants of SARS-CoV-2 altered the structure and function of mitochondria, nucleus, and rough endoplasmic reticulum of cells. Monolayers infected with the Delta variant showed the highest number of modified cells and the greatest statistically significant differences compared to those of other variants. Viral particles were observed in the cytosol and the cell membrane in 100 % of the cells at 48 hpi. Alpha showed the highest mean particle diameter (79 nm), and Gamma and Delta were the smallest (75 nm). Alpha and Gamma had the highest particle frequency per field at 48 hpi, while the same was observed for Zeta and Delta at 72 hpi and 24 hpi, respectively. The cycle threshold of viral RNA varied among the target protein, VOC, and time of infection. The findings presented here demonstrate that all four VOCs evaluated caused ultrastructural changes in Vero-E6 cells, which were more prominent when infection occured with the Delta variant.

Exploring Scientific Connotation of "Fried Charcoal Survivability" of Lonicerae Japonicae Flos Based on Color-composition Correlation / 中国实验方剂学杂志

ObjectiveTo explore the scientific connotation of fried charcoal survivability of Lonicerae Japonicae Flos（LJF） by analyzing the correlation between the color change and the intrinsic components during the processing of LJF Carbonisata（LJFC）， and taking pH， charcoal adsorption and microscopic characteristics as indexes. MethodLJFC samples with different degrees of processing were prepared according to the stir-frying time of 0.0， 1.5， 3.0， 4.5， 6.0， 7.5， 9.0， 10.5 min（numbered S1-S8）， and the contents of gallic acid， chlorogenic acid， cryptochlorogenic acid， rutin， luteoloside， isochlorogenic acid A and isochlorogenic acid C were determined by high performance liquid chromatography（HPLC）， and the L*（brightness）， a*（red-greenness） and b*（yellow-blueness） of LJFC samples with different degrees of processing were determined by spectrophotometer， and the correlation analysis and principal component analysis（PCA） between the contents of seven representative components and the color of the samples were carried out by SPSS 26. 0 and SIMCA-P 14.1. Then pH， adsorption force and characteristic structure of different samples of LJFC were detected and the processing pattern of LJFC was analyzed. ResultThe results of quantitative analysis revealed that the contents of luteoloside， rutin， chlorogenic acid and isochlorogenic acid A gradually decreased， and the contents of cryptochlorogenic acid， isochlorogenic acid C and gallic acid firstly increased and then decreased. The L* and b* of the sample powders decreased， and a* showed a trend of increasing and then decreasing. The L* and b* were positively correlated with the contents of chlorogenic acid， rutin， luteoloside， isochlorogenic acid A， b* was positively correlated with the content of gallic acid， and a* was positively correlated with the contents of cryptochlorogenic acid and isochlorogenic acid C. PCA revealed that samples could be clearly divided into 3 groups， S1-S2 as one group， S3-S5 as one group， and S6-S8 as one group， with S3 having the highest score. The results of regression analysis showed that only isochlorogenic acid C could be used to predict the contents of components by colorimetric values combined with regression equations. Physicochemical analysis showed that pH of LJFC increased with the increase of degree of charcoal stir-frying， while adsorption force showed a tendency of increasing and then decreasing， with the highest adsorption force in the S5 sample， and the non-glandular hairs， calcium oxalate clusters and pollen grains had a varying degree of decreasing with the deepening of processing degree， and the microstructures of S6-S8 samples were obviously charred with pollen grains almost invisible. ConclusionThe changes in chemical composition and color characteristics of LJFC during the processing have certain correlations， combined with the changes in physicochemical properties， S5 sample is found to be the optimal processed products， which can provide a reference for the processing standardization and quality evaluation of LJFC， and enrich the scientific connotation of fried charcoal survivability of LJF.

Quality Evaluation of Atractylodis Macrocephalae Rhizoma in Different Production Methods Based on Traditional Traits / 中国实验方剂学杂志

ObjectiveBased on the experience of traditional quality evaluation， the quality of Atractylodis Macrocephalae Rhizoma（AMR） with different production methods such as direct seeding， transplanting after seedling raising， topping and non-topping， and difference in growth years was compared. MethodVernier caliper was used to measure the trait data of AMR in different production methods. Paraffin sections of AMR with different production methods were made by saffron solid green staining， and the microstructure was observed. The contents of water-soluble and alcohol-soluble extracts in AMR with different production methods were determined according to the 2020 edition of Chinese Pharmacopoeia. The content of water-soluble total polysaccharides in AMR with different production methods was detected by sulfuric acid-anthrone method. Fiber analyzer was used to detect the content of fiber components in AMR with different production methods. The contents of monosaccharides， oligosaccharides and some secondary metabolites in AMR with different production methods were detected by ultra performance liquid chromatography（UPLC）， and the differences of chemical components were compared by multivariate statistical analysis methods such as principal component analysis（PCA） and partial least squares-discriminant analysis（PLS-DA）. ResultIn terms of traits， the 3-year-old AMR with direct seeding and without topping was close to the high-quality AMR with "phoenix-head and crane-neck， strong sweetness and clear aroma" recorded in ancient materia medica， followed by the 3-year-old AMR with topping after transplanting， while the 2-year-old AMR with topping after transplanting with high market circulation rate was generally fat and strong with mild odor. In the microscopic aspect， the arrangement of xylem vessels and fiber bundles in the 3-year-old samples formed two obvious rings. Compared with the 2-year-old samples cultivated in Bozhou and Zhejiang， the 3-year-old samples without topping after transplanting had more wood fibers. In terms of chemical composition， the contents of 70% ethanol extract， fructose， glucose， sucrose， 1-kestose， atractylenolide Ⅰ， chlorogenic acid， neochlorogenic acid， cryptochlorogenic acid and other components in 3-year-old AMR with direct seeding and without topping were significantly higher than those in the other three samples（P<0.05）. The contents of cellulose， 70% ethanol extract， sucrose， atractylenolide Ⅰ， atractylone and other components in 3-year-old AMR with topping after transplanting were significantly higher than those in the 2-year-old AMR with high market circulation rate（P<0.05）， while the contents of water-soluble extract and water-soluble total polysaccharides in 2-year-old samples with topping after transplanting were significantly higher than those in the 3-year-old AMR with topping after transplanting， direct seeding and without topping（P<0.05）. ConclusionUnder the current mainstream production mode， too much manual intervention makes AMR heavily enriched in polysaccharides and increased the yield， but the accumulation of sweet substances， fragrant substances and fiber substances is insufficient， which affects its quality. The current quality standard of AMR has some shortcomings in guiding the high quality production of it， it is suggested to revise the quality standard of AMR， supplement the quantitative analysis of secondary metabolites， and strengthen the production of imitation wild AMR.

Synthesis, characterization and protection effect of black rice anthocyanins nano-composite against hepatotoxicity induced by methotrexate in rats

Abstract The present study aimed to investigate the beneficial of prepared black rice anthocyanins nano-composite (An-AgNps) against hepatotoxicity induced by methotrexate (MTX) in rats. Anthocyanins nano-composite was prepared by silver as the metallic ion reduction and were characterized by IR and SEM. The rats in our experiment were divided into five groups. Serum lipid profile, serum transaminases (ALT and AST), ALP, LDH, TBA, GSH and SOD were examined. The results show that SEM of An-AgNps has average particle size from 70 to 130nm. In the group treated with MTX; TC, TG, LDL-c, ALT, AST, ALP, LDH and TBA levels were significantly (P0.05) increased than NC, while, HDL-c, SOD and GSH levels were significantly (P0.05) decreased. On the other hand, An-AgNps + MTX treated groups were reversed the levels of all biomarkers similar to NC. In conclusion, the results show that An-AgNps has a protective effect on MTX-induced hepatotoxicity and oxidative stress.

Resumo O presente estudo teve como objetivo investigar o benefício de nanocompósito de antocianinas de arroz preto preparado (An-AgNps) contra a hepatotoxicidade induzida por metotrexato (MTX) em ratos. O nanocompósito de antocianinas foi preparado a partir da prata por meio da redução do íon metálico e caracterizado por IR e SEM. Os ratos em nosso experimento foram divididos em cinco grupos, e foram examinados o perfil lipídico sérico, as transaminases séricas (ALT e AST), ALP, LDH, TBA, GSH e SOD. Os resultados mostram que SEM de An-AgNps tem tamanho médio de partícula de 70 a 130 nm. No grupo tratado com MTX, os níveis de TC, TG, LDL-c, ALT, AST, ALP, LDH e TBA aumentaram significativamente (P 0,05) do que NC, enquanto os níveis de HDL-c, SOD e GSH diminuíram significativamente (P 0,05). Por outro lado, nos grupos tratados com An-AgNps + MTX, foram revertidos os níveis de todos os biomarcadores semelhantes ao NC. Em conclusão, os resultados mostram que o An-AgNps tem um efeito protetor contra a hepatotoxicidade induzida pelo MTX e o estresse oxidativo.

Displasia mesenquimal placentaria

La displasia mesenquimal placentaria es una entidad poco frecuente, confundida al ultrasonido y macroscopía con mola parcial por las lesiones vesiculares y la presencia de feto. La microscopía revela vellosidades troncales hidrópicas con gran hiperplasia mesenquimal y lesiones vasculares prominentes, pero sin hiperplasia del epitelio trofoblástico. El feto, generalmente femenino, puede ser normal o presentar retardo del crecimiento intrauterino, malformaciones, tumores o cromosomopatías. Presentamos el estudio de cuatro casos de displasia mesenquimal placentaria; tres primigestas de 39 y 20 años de edad, y una segundigesta de 26 años. La mayor, del tercer trimestre, cursó con preeclampsia y mortinato de sexo femenino con anomalías pulmonar y esplénica, las otras dos presentaron sangrado vaginal y dolor pélvico y un caso fue un hallazgo en el control prenatal a las 8 semanas de gestación. En tres casos se observaron feto y embrion, dos de ellos tuvieron necropsia.

Placental mesenchymal dysplasia is a rare entity, confused with ultrasound and macroscopy with partial mole due to vesicular lesions and the presence of a fetus. Microscopy reveals hydropic trunk villi with great mesenchymal hyperplasia and prominent vascular lesions but without hyperplasia of the trophoblastic epithelium. The fetus, usually female, may be normal or present malformations, tumors or chromosomopathies. We present the study of four cases of placental mesenchymal dysplasia; three first-pregnancies, aged 39 and 20, and a second-pregnancy, aged 26. The oldest in the third trimester presented with preeclampsia and a female stillbirth with pulmonary and splenic anomalies, the other two presented vaginal bleeding and pelvic pain and one case was a finding in prenatal control at 8 weeks of gestation. In three cases, fetus and embryo were observed, two of them had a necropsy.

Avaliação dos Efeitos da Remoção da Resina Residual e do Polimento na Superfície do Esmalte após Descolagem do Braquete / Evaluation of the Effects of Residual Resin Removal and Polishing on the Enamel Surface after Bracket Debonding

Considerando o uso de brocas para remoção da resina residual após descolagem do braquete e a possibilidade de injúrias à superfície do esmalte após o uso dessas brocas, este trabalho teve como objetivo realizar um estudo experimental, para avaliar a variação do aspecto superficial do esmalte de forma qualitativa, por meio da avaliação com imagens topográficas do esmalte dentário, utilizando-se a Microscopia Eletrônica de Varredura (MEV), a qual permitiu ilustrar e avaliar a superfície do esmalte após a fase de polimento final, realizada por dois métodos: taça de borracha ou escova Robinson. Foram utilizados 25 dentes pré-molares humanos, obtidos a partir de exodontias em pacientes que procuraram voluntariamente o curso de Residência em Cirurgia da Clínica Odontológica Universitária da Universidade Estadual de Londrina. Os dentes foram divididos em quatro grupos: A, B, C e D, contendo 6 dentes cada, de acordo com as brocas utilizadas para a remoção do remanescente adesivo e o polimento escolhido, além de um dente como "controle". Foi avaliada a rugosidade superficial do esmalte após a remoção da resina e a superfície do esmalte após o polimento com as duas opções apresentadas. Os resultados mostraram que, por observação e inspeção, as brocas removeram a resina residual de todos os dentes, porém, causaram riscos e ranhuras, como evidenciado nas imagens em MEV. Concluiu-se que não houve diferença estatística entre os métodos de polimento e que ambos foram importantes para a redução das marcas abrasivas, proporcionando uma superfície mais lisa do esmalte.

Considering the use of specific burs to remove residual resin after bracket debonding and the possibility of injuries to the dental enamel after using these burs, this study aimed to verify the variation in the enamel surface appearance in a qualitative way and evaluation with topographic images of the dental enamel. The use of Scanning Electron Microscopy (SEM) allowed to illustrate and evaluate the enamel surface after the final polishing phase using two methods: rubber cup or Robinson brush. Twenty-five human premolar teeth were obtained from extractions in patients who voluntarily sought the Oral Maxillofacial Surgery Residency at the Dental School from the State University of Londrina; the teeth were divided into four groups A, B, C and D containing 6 teeth each according to the burs used to remove the remaining adhesive and the chosen polishing, in addition to one tooth as a "control". Dental enamel surface roughness was evaluated after resin removal and enamel surface after polishing with the two methods presented. The results showed that by observation and inspection, the burs removed residual resin from all teeth, however, caused scratches and grooves as evidenced in the SEM images. Based on the results, there was no statistical difference between the polishing methods, and both were important for the reduction of abrasive marks and provided a smoother enamel surface.

Removal and identification of a subconjunctival parasite by light and scanning electron microscopy

Background: Ophthalmic dirofilariasis is an uncommon zoonotic parasitic infection caused by species of Dirofilaria, a dog tapeworm that is transmitted to human by mosquitoes. Man is a dead?end host for the parasite. Ophthalmic involvement is rare and includes periorbital, subconjunctival, subtenon, and intra?ocular involvement. We report the removal of a subconjunctival worm and identification by light microscopy (LM) and scanning electron microscopy (SEM). Purpose: A 62?year?old female presented with complaints of redness, discharge, and foreign body sensation with difficulty in opening eyes in the left eye for the last 3 days. The patient is a non?vegetarian. On examination, her best corrected visual acuity in both eyes was 20/20. On slit lamp examination, there was a long, thin, round, coiled white subconjunctival live worm in the left eye superiorly. The rest of anterior segment evaluation, intra?ocular pressure, and fundus was normal in both eyes. The parasite was removed under local anesthesia from subconjunctival space [Video]. External surface morphology under LM revealed fine transverse cuticular striations with tapered cephalic and caudal ends. Uterus was long and coiled with indistinguishable masses inside. The finding was also confirmed by SEM. Synopsis: A subconjuctival parasite was removed and identified as Dirofilaria repens by characteristic LM and SEM findings. Highlight: Dirofilaria species may lodge in many tissues of human bodies including eye and adnexa. Dirofilaria is a natural parasite of carnivorous animals, mostly dogs, cats, and foxes.[1] The most common mode of transmission to human is usually by bite of mosquitoes like Culex and Aedes, which are considered as vectors, and it is often thought that parasitemia is because of accidental conduction.[1] Simple surgical removal of the worm is curative. After removal, the worm should be visualized directly under LM. All the internal structures of the transparent worm could be seen and compared with those under SEM.

Efficacy of ClinproTMXT Varnish surrounding brackets on the enamel surface of white spot lesion

Abstract Orthodontics patients usual develop demineralization and present cavity caries lesions after six months. Minimally invasive procedures have been the goal in modern dental practice. The aim of this study was to evaluate the effect of ClinproTMXT Varnish, on the enamel surface roughness and severity of white spot lesions. Twenty premolars were submitted to bond brackets and experimental induction of demineralization and randomly divided into 2 groups: GI - fluoride varnish (Colgate Duraphat®); GII - Ionomeric Sealant (ClinproTMXT Varnish). The treatment was applied around the brackets. The surface roughness of specimens was analyzed, before treatment and 12 weeks after treatment by laser confocal microscopy, and the severity of the white spot lesion was by laser fluorescence device. The data were analyzed by non-parametric Wilcoxon and Mann-Whitney Test, at 5% significance, roughness percentage reduction was performed. The severity of demineralization decreased in both, GI (p = 0.005) and GII (p = 0.019). Enamel superficial roughness levels decreased in GI and GII. As well as the roughness percentage, being more expressive in the ClinproTMXT Varnish group (85,09%). Colgate Duraphat® or Clinpro™ XT Varnish reduced the severity of the demineralization and decreased the superficial roughness on the enamel. The Clinpro™ XT Varnish was superior to superficial roughness on enamel.

Resumo Pacientes ortodônticos geralmente desenvolvem desmineralização e apresentam lesões de cárie após seis meses de tratamento. Procedimentos minimamente invasivos têm sido o objetivo na prática odontológica moderna. O objetivo deste estudo foi avaliar o efeito do ClinproTM XT selante ionomérico, ao redor do bráquete, com relação a rugosidade superficial do esmalte e a severidade da lesão induzida. Vinte pré-molares foram submetidos a colagem de bráquetes e indução experimental de desmineralização e divididos aleatoriamente em 2 grupos: GI - verniz fluoretado (Colgate Duraphat®); GII - Selante Ionomérico (ClinproTM XT). O tratamento foi aplicado ao redor dos bráquetes. A rugosidade da superfície dos espécimes foi analisada, antes do tratamento e 12 semanas após o tratamento por microscopia confocal a laser e severidade da lesão de mancha branca por dispositivo de fluorescência a laser. Os dados foram analisados pelo teste não paramétrico de Wilcoxon e Mann-Whitney, a 5% de significância. A taxa de redução da lesão foi calculada. A severidade da desmineralização diminuiu tanto no GI (p = 0,005) quanto no GII (p = 0,019). Os níveis de rugosidade superficial do esmalte diminuíram no GI e GII, assim como o percentual de rugosidade, sendo mais expressivo no grupo ClinproTMXT (85,09%). Colgate Duraphat® e Clinpro™ XT reduziram a severidade da desmineralização e diminuíram a rugosidade superficial do esmalte. O selante ionomérico Clinpro™ XT foi superior na redução percentual de rugosidade.

Light Microscopic, Ultrastructure Analysis and Functional Morphology of Cornu aspersum Spermatozoa Contained in the Frozen Hermaphroditic Duct / Análisis de Microscopía de Luz, Ultraestructura y Morfología Funcional de Espermatozoides de Cornu aspersum Contenidos en el Conducto Hermafrodita Congelado

SUMMARY: In this study we describe the functional morphology of Cornu aspersum (Helix aspersa), spermatozoa using light, scanning (SEM) and transmission electron (TEM) microscopies. The studies were performed with sperm located in the frozen hermaphroditic duct. Our results showed that the head presents an elongated conical shape slightly coiled in a corkscrew, with the nucleus partially covered by an acrosome, where an apical vesicle is located at the lateralized apex. This peculiar shape suggests the helical displacement movement of the spermatozoa. The head and the nucleus are slightly larger size compared to those of other gastropod species. The intermediate tract is surrounded by a mitochondrial complex and a glycogen helix. The glycogen helix is coiled helically along the intermediate tract, presenting at least five twists of glycogen helices. The complexity of both the mitochondrial complex and the glycogen helix suggests a high metabolic consumption considering the long period of time until fertilization occurs. Our findings on the detailed characterization of Cornu aspersum spermatozoa, obtained from a frozen hermaphroditic duct can contribute to a better understanding of the functional morphology of sperm and serve as a reference for future studies.

En este estudio describimos la morfología funcional de Cornu aspersum (Helix aspersa), espermatozoides utilizando microscopías de luz, barrido (SEM) y electrónica de transmisión (TEM). Los estudios se realizaron con espermatozoides localizados en el conducto hermafrodita congelado. Nuestros resultados mostraron que la cabeza presenta una forma cónica alargada ligeramente enrollada en un tirabuzón, con el núcleo parcialmente cubierto por un acrosoma, donde se ubica una vesícula apical en el ápice lateralizado. Esta peculiar forma sugiere el movimiento de desplazamiento helicoidal de los espermatozoides. La cabeza y el núcleo son de un tamaño ligeramente mayor en comparación con los de otras especies de gasterópodos. El tracto intermedio está rodeado por un complejo mitocondrial y una hélice de glucógeno. La hélice de glucógeno se enrolla helicoidalmente a lo largo del tracto intermedio, presentando al menos cinco giros de hélices de glucógeno. La complejidad tanto del complejo mitocondrial como de la hélice de glucógeno sugiere un alto consumo metabólico considerando el largo período de tiempo hasta que ocurre la fecundación. Nuestros hallazgos sobre la caracterización detallada de los espermatozoides de Cornu aspersum, obtenidos de un conducto hermafrodita congelado, pueden contribuir a una mejor comprensión de la morfología funcional de los espermatozoides y servir como referencia para futuros estudios.

Small-fibre neuropathy in leprosy the role of in vivo confocal microscopy: A cross-sectional study

Background: Leprosy (or Hansen’s disease) continues to present considerable challenges regarding containment and early diagnosis. Leprosy is considered to be primarily a neural disease that first affects the sensory function of small fibres. Although the condition is well described in terms of clinical manifestations and histology, few studies have been undertaken to detect damage done to small-fibre sensory nerves. In vivo confocal microscopy is a useful tool for conducting a detailed evaluation of these structures, although its use in individuals affected by leprosy has still not been explored. Objective: To evaluate in vivo confocal microscopy findings in Hansen’s disease patients and their association with clinical variables relating to this disease. Method: A cross-sectional case-series type study was carried out between October 2019 and May 2021, in Recife, Pernambuco, Brazil. Socio-demographic and clinical data were gathered from 21 patients with leprosy. The douleur neuropathique 4 neuropathic pain questionnaire was used to evaluate pain. In vivo confocal microscopy of the cornea was employed to evaluate the small-calibre fibres. Findings were compared with those for a control group of 23 healthy individuals. Results: In relation to clinical parameters, 90.5% of the patients were classified as “multibacillary” according to the World Health Organization criteria, and 70% as dimorphic or borderline, in accordance with the Madrid classification. Around 52.4% had received a diagnosis after one year or less of living with the disease, while 95.2% presented alterations in small-fibre sensory function and 35% presented such alterations in the large fibre. Neuropathic pain was present in 81% of the patients. In vivo confocal microscopy found no statistically significant difference in mean age and distribution according to sex between the Hansen disease patients and the control group of healthy individuals. The median-of-means for dendritic cells and volume of sub-basal nerve fibres in the control group were used to test for normality. Both eyes of all leprosy patients examined contained higher number of dendritic cells than the median value and a volume of sub-basal nerve fibres lower than the mean. These differences were statistically significant (P < 0.001 and P < 0.001, respectively). Multibacillary individuals had a median number of dendritic cells two times that of paucibacillary individuals (P = 0.035). Limitations: No association was found between the variables examined using in vivo confocal microscopy and clinical variables relating to small-fibre damage, the neuropathic pain questionnaire or alterations detected by the neurological examination. We believe, however, that Cochet-Bonnet esthesiometry of the cornea may have revealed such an association. Conclusion: In vivo confocal microscopy is a useful diagnostic tool for detecting small fibre loss in individuals affected by leprosy and may constitute a useful addition to the range of tools available to help curb the effects of neuropathy in these patients.

Effect of different obturation techniques on sealer penetration into dentinal tubules after final irrigation with XP-Endo finisher file

The first objective of this research was to evaluate the effectiveness of XP-Endo Finisher on dentinal tubule penetration of irrigation solution using confocal laser scanning microscopy. The main purpose of this research was to compare the effect of cold lateral condensation, continuous wave obturation and core-carrier based techniques on sealer penetration. Sixty mandibular premolars were prepared and allocated into two experimental groups (n=30) as the final irrigation technique and obturation technique experiment. In the final irrigation technique experiment, final irrigation was performed with XP-Endo Finisher, passive ultrasonic irrigation (PUI) and conventional needle irrigation (CNI) (n=10). The roots in the obturation technique experiment were also assigned into 3 groups and obturated with cold lateral condensation, continuous-wave obturation and core-carrier techniques (n=10). The most effective activation method, which emerged as a result of the first part of this study, was used as the final irrigation method in the obturation technique experiment. Then, all roots were sectioned in 1-mm-thick slices at 3mm from the apex for scanning. In terms of depth and percentage of material penetration, CNI exhibited significantly the lowest values and no significant difference was found between others. Also, there was no significant difference among obturation methods. In conclusion, XP-Endo Finisher and PUI are more effective than CNI on irrigant penetration. Sealer penetration into dentinal tubules is independent of obturation techniques.

El objetivo principal de esta investigación fue evaluar la eficacia de XP- Endo Finisher en la penetración de la solución de irrigación en los túbulos dentinarios mediante microscopía de láser confocal. Se prepararon sesenta premolares mandibulares y se distribuyeron en dos grupos experimentales (n=30) según el tipo de método de evaluación utilizado. En el experimento de la técnica de irrigación final, la irrigación final se realizó con XP-Endo Finisher, irrigación ultrasónica pasiva (PUI) e irrigación con aguja convencional (CNI) (n=10). Las raíces en el experimento de la técnica de obturación también se asignaron en 3 grupos y se obturaron con técnicas de condensación lateral fría, obturación de onda continua y portador de núcleo (n=10). El método de activación más eficaz, que surgió como resultado de la primera parte de este estudio, se utilizó como método de irrigación final en el experimento de la técnica de obturación. Luego, todas las raíces se seccionaron en muestras de 1mm de espesor. En términos de profundidad y porcentaje de penetración del material, CNI exhibió significativamente los valores más bajos y no se encontraron diferencias significativas entre los demás. Además, no hubo diferencias significativas entre los métodos de obturación. En conclusión, XP-Endo Finisher y PUI son más efectivos que CNI en la penetración del irrigante. La penetración del sellador en los túbulos dentinarios es independiente de las técnicas de obturación.

Ayudas diagnósticas y diagnóstico diferencial de la enfermedad de Pompe

Introducción: La enfermedad de Pompe (EP) o glucogenosis tipo II es una enfermedad autosómica recesiva causada por mutaciones en el gen GAA que codifica para la proteína alfa-1,4-glucosidasa. Su deficiencia lleva a un almacenamiento anormal de glucógeno en los lisosomas de varias células, a través de los diferentes tejidos, lo que causa un compromiso musculoesquelético predominante. Contenidos: Los fenotipos de la enfermedad dependen de las variantes genéticas y de los niveles de la actividad enzimática residual. La enfermedad se presenta como EP de inicio infantil, EP de inicio tardío y EP intermedio, por lo que es de suma importancia su diagnóstico temprano, por medio de estudios moleculares como la secuenciación de Sanger y la secuenciación de nueva generación. Conclusiones: Se ha demostrado, mediante diferentes estudios, que las variaciones genéticas pueden diferir entre etnias, y es importante su caracterización molecular para determinar el tratamiento más adecuado, de acuerdo con el estado del material inmunológico de reacción cruzada (CRIM).

Introduction: Pompe disease (PD) or Glycogenosis Type II is a rare autosomal recessive disease caused by mutations in the GAA gene that codes for the alpha-1,4-glucosidase protein. Its deficiency leads to abnormal glycogen storage in the lysosomes of various cells throughout the different tissues causing a predominant musculoskeletal compromise. Contents: The phenotypes of the disease depend on the genetic variants and the levels of residual enzyme activity, presenting as infantile-onset PD, late-onset PD, and intermediate PD; Therefore, early diagnosis of the disease through molecular studies such as Sanger sequencing and new generation sequencing is of utmost importance. Conclusions: It has been shown through different studies that genetic variations can vary between ethnic groups and the molecular characterization of the variants is important to determine the most appropriate treatment depending on the state of the cross-reactive immunological material (CRIM)